Bitget Futures Grid is an automated perpetual-futures strategy that repeatedly opens and closes positions across a price range you define. Unlike Spot Grid, it uses margin and leverage, so a Futures Grid bot can be liquidated and its total result can be negative even while completed grids show a profit. Choose Long, Short or Neutral only after defining the range, invalidation point, maximum acceptable loss and funding-cost risk.
This guide covers Bitget’s standard self-configured Futures Grid: direction, AI and manual settings, arithmetic and geometric spacing, margin, estimated liquidation price, profit figures, trading fees, funding and termination. It does not cover Futures Position Grid, Futures Martingale, Futures Trend-Following, Signal Bot or copy trading. Last verified: September 5, 2026. Pair availability, leverage, minimum investment, fee rates, funding intervals and interface controls can vary by contract, account, region and app version; the live creation screen and logged-in account records are the final checks.
Bitget Futures Grid in one minute
| Decision | What it controls | Main risk to check |
|---|---|---|
| Long, Short or Neutral | The direction of the futures exposure the grid builds and closes | A persistent move against the chosen direction can create a large floating loss or liquidation. |
| Lower and upper price | The range in which new grid orders are placed | Leaving the range can stop new grid activity while an open leveraged position remains exposed. |
| Number of grids | How tightly the range is divided | More grids create smaller intervals; gross profit per completed grid may be reduced by fees, funding and slippage. |
| Arithmetic or geometric | Equal price differences or equal percentage ratios between levels | The method changes spacing, not the direction or liquidation risk. |
| Leverage and margin | Position exposure relative to committed capital | Higher leverage moves the liquidation threshold closer and can magnify loss; reserved or transferred margin also increases capital at risk. |
| TP/SL and stop plan | When the strategy should terminate | Triggers do not guarantee the displayed exit price, particularly in a fast or illiquid market. |
A sensible order is: choose a liquid contract you understand, write down the directional thesis and invalidation level, select Long, Short or Neutral, define the range, compare grid counts and after-fee spacing, choose conservative leverage, review estimated liquidation prices and funding, then specify how the bot will stop. Do not begin with a desired APY and adjust leverage until the preview looks attractive.
How the standard Bitget Futures Grid works
A Futures Grid divides a lower-to-upper price range into levels and places orders that open or reduce perpetual-futures positions as price crosses those levels. A completed grid pair can realize the difference between its entry and exit after transaction fees, but the bot may also hold an unmatched open position whose value moves with the market.
Bitget’s current website guide uses the path Trade > Bots > Futures > Futures grid. The app guide uses Trade > Bots > Create a bot > Futures Grid. In both cases, confirm that the product name is standard Futures Grid before committing margin; similarly named products can use different parameters and termination behavior.
If you are not yet comfortable with perpetual contracts, position value, margin, mark price and funding, review the broader Bitget futures trading guide before using a bot. Automation changes order placement, but it does not remove the underlying derivatives exposure.
Choose Long, Short or Neutral before choosing leverage
| Direction | Basic market thesis | How the grid behaves | Primary failure mode |
|---|---|---|---|
| Long | Price may rise while repeatedly retracing inside the range | Builds long exposure at lower levels and reduces it at higher levels | A sustained fall can leave a losing long position and move the bot toward liquidation. |
| Short | Price may fall while repeatedly rebounding inside the range | Builds short exposure at higher levels and buys back at lower levels | A sustained rise can leave a losing short position and move the bot toward liquidation. |
| Neutral | Price may oscillate without a durable directional trend | Uses both sides of the range to capture movement according to the product’s neutral logic | A forceful breakout can create one-sided exposure; “Neutral” is not a guarantee of market neutrality or loss protection. |
Direction should come from an explicit thesis, not from whichever backtest shows the highest historical APY. Ask what price move would prove the setup wrong and whether your stop would be reached before the estimated liquidation threshold. If those answers are unclear, leverage should not be the next decision.
AI settings vs manual settings
AI mode provides suggested settings based on Bitget’s market analysis or historical data. It can reduce setup time, but it does not forecast the next trend, guarantee that a range will hold or choose an acceptable loss for you. Review the proposed direction, range, grid count, leverage, estimated APY, duration and minimum margin rather than treating the recommendation as approval to trade.
Manual mode lets you select the contract, direction, lower and upper prices, grid count, leverage and investment. Depending on the current interface, advanced controls can include trigger price, TP/SL, slippage tolerance, trailing grid, reserve funds, automatic profit transfer and automatic margin transfer. Use only settings visible on your live account because availability and labels can change.
| Mode | Useful when | Required user check |
|---|---|---|
| AI | You want a data-based starting configuration | Test whether the suggested range, direction and leverage match your own risk limit; historical performance is not a future result. |
| Manual | You already have a directional thesis, range and invalidation rule | Confirm spacing after fees, position exposure, estimated liquidation prices, minimum investment and exit behavior. |
Set the price range and grid count together
The range defines where the bot places new grid orders; the grid count determines the distance between those orders. A narrow range can create more frequent opportunities but can be left quickly. A wide range may survive a larger move, but it spreads available margin across more levels and can reduce order size or trading frequency.
- Lower boundary: for a Long grid, plan for continued losses if price falls through it; for a Short grid, do not assume the lower boundary guarantees an exit.
- Upper boundary: for a Short grid, plan for continued losses if price rises through it; for a Long grid, do not assume the upper boundary captures all further upside.
- Grid count: more grids mean smaller intervals and potentially more fills, but not automatically more net profit.
- Order value: confirm that every planned order satisfies the live contract’s minimum quantity and risk limits.
- Invalidation: place the risk decision before the estimated liquidation level instead of using liquidation as the stop-loss plan.
Bitget’s current website and mobile guides say the price range and grid count can be adjusted while a bot is running. The adjustment can cancel unfilled orders, rebalance the position and reinitialize the grid. If remaining funds, including unrealized PnL, do not satisfy the recalculated minimum investment, the change can require additional margin. Treat this as a position-changing action, not a cosmetic edit.
Arithmetic vs geometric grids
Arithmetic spacing uses an equal absolute price difference between adjacent levels:
Arithmetic interval = (Upper price − Lower price) ÷ Number of grids
For an educational range from 90 to 110 with four grids, the interval is 5 and the levels are 90, 95, 100, 105 and 110. The absolute gap stays the same, but its percentage of price becomes smaller at higher levels.
Geometric spacing uses an equal percentage ratio:
Geometric ratio = (Upper price ÷ Lower price) ^ (1 ÷ Number of grids)
Geometric spacing can be easier to compare across a wide percentage range, while arithmetic spacing is easier to read in price units. Neither method is inherently safer or more profitable. Compare the live rounded prices, quantities and displayed profit per grid after fees.
Margin, leverage and liquidation
Leverage increases position exposure relative to committed margin. The rough expression position value ÷ leverage can help explain initial margin, but it is not a complete prediction of the amount required or the liquidation price. Open orders, current position, maintenance margin, contract risk tiers, trading fees, funding, reserved funds and account rules can all matter.
Bitget’s official Futures Grid materials currently contain different platform-level leverage examples, including 125x and 150x, while individual contracts can have much lower limits. For that reason, this guide does not assign one universal maximum. Use the maximum shown for the selected pair in the live creation screen and remember that an available setting is not a recommendation.
| Screen item | What to read | Risk interpretation |
|---|---|---|
| Initial or actual margin | Capital currently supporting the strategy | It is not a guaranteed maximum loss if more margin can be added or transferred. |
| Reserved margin | Additional funds set aside to support adverse movement | It can delay pressure on the position but does not eliminate liquidation. |
| Automatic margin transfer | Permission to add funds from the specified account when margin is low | It can increase the total amount exposed. Confirm the source account and cap rather than assuming it is free protection. |
| Estimated liquidation price | An estimate based on the bot’s current or maximum modeled position | It can change as orders fill, PnL and funding change, or parameters are adjusted. |
| TP/SL | Configured termination triggers | A trigger starts the exit process; it does not guarantee execution at the exact trigger price. |
Bitget’s parameters guide distinguishes estimated liquidation prices for the current position from estimates assuming more Long or Short grid orders fill. Read the figure that matches the exposure you are evaluating. A bot that looks comfortably collateralized now can move closer to liquidation as additional orders build a larger one-sided position.
Grid profit, floating PnL and total profit are not interchangeable
Bitget’s terminology can vary slightly by interface version, but the economic distinction is consistent: completed grid trades produce realized grid profit after transaction fees, while an unmatched open futures position produces accrued, floating or unpaired PnL. Total profit combines the realized grid component with the open-position component at the current valuation.
Total profit ≈ Grid profit + Accrued or floating PnL Grid profit = Completed grid arbitrage profit − Transaction fees Floating PnL = Unrealized result of the current open position
| Figure | What it answers | Common error |
|---|---|---|
| Grid profit | What completed grid pairs have realized after their displayed transaction fees | Calling it the bot’s final result |
| Floating, accrued or unpaired PnL | How the open futures position is performing now | Ignoring it because completed grids are profitable |
| Total profit | The combined strategy result at the current valuation | Treating it as final before the position is actually closed |
| APR or APY | An annualized projection based on historical or current performance | Reading a short-period annualized figure as a promised return |
A positive-grid-profit, negative-total-profit example
Assume completed grid pairs show 42 USDT of grid profit after transaction fees, while the current directional position has −70 USDT of floating PnL. The approximate total is 42 − 70 = −28 USDT. Positive grid profit has not prevented an overall loss, and the final realized result can change again when the position is closed, funding is settled or slippage occurs.
Trading fees and funding are two different costs
Bitget’s Product Fees FAQ, published August 20, 2026, states that a self-configured Futures Grid bot has no separate subscription fee; its executions use the standard futures fee structure. The same official FAQ lists standard futures rates of 0.02% maker and 0.06% taker. Actual rates can differ by VIP tier, account type, contract, region or promotion, so confirm the live schedule and your account history. The Bitget fee guide and calculator explains the broader fee structure.
Approximate transaction-fee example
Suppose a completed grid cycle uses 0.01 BTC, opens at 100,000 USDT and closes at 101,000 USDT. The entry order value is 1,000 USDT, the exit order value is 1,010 USDT and gross price profit is 10 USDT.
| Illustrative execution | Entry fee | Exit fee | Net before funding and slippage |
|---|---|---|---|
| Both executions charged at 0.02% maker | 1,000 × 0.02% = 0.20 USDT | 1,010 × 0.02% = 0.202 USDT | 10 − 0.402 = 9.598 USDT |
| Both executions charged at 0.06% taker | 1,000 × 0.06% = 0.60 USDT | 1,010 × 0.06% = 0.606 USDT | 10 − 1.206 = 8.794 USDT |
This is an educational comparison, not a claim that every grid leg receives the same liquidity classification. Actual fee treatment depends on how each order executes. Contract quantity rules, price rounding, spread, VIP rates and promotions can change the result.
Approximate funding example
Funding applies to an open perpetual-futures position at the relevant settlement time and is exchanged between Long and Short holders rather than paid to Bitget as a trading fee. Bitget’s May 2026 guide gives the basic formula:
Funding payment = Position value × Funding rate
If the open position value is 5,000 USDT and the funding rate is +0.01%, the payment is 5,000 × 0.01% = 0.50 USDT. At a positive rate, the Long side pays and the Short side receives; at −0.01%, the direction reverses. The calculation uses position value, not just the margin committed.
Do not assume funding is always settled every eight hours. Bitget states that the interval can vary by contract—for example, one, four or eight hours—and its July 2026 methodology update changed how premium-index data is sampled. Check the selected contract’s current funding rate, countdown and interval before leaving a grid open across settlement.
What happens outside the range, after an adjustment or when the bot stops?
- Outside the configured range: Bitget’s current guides say the bot stops placing new grid orders until price returns. Any open futures position, floating PnL, funding exposure and liquidation risk can remain.
- After a range or grid-count adjustment: unfilled orders can be canceled, the position can be rebalanced and the grid can be initialized again. Additional funds may be required.
- After manual cancellation: Bitget’s Futures Grid FAQ says open positions are closed at the current market price, realized PnL is calculated and remaining assets are returned to the futures account.
- After TP/SL: actual exit can differ from the trigger because of liquidity, volatility and slippage.
- After delisting, suspension or insufficient margin: the bot can stop for operational or risk-control reasons. Check the strategy record and official notice rather than assuming a normal exit.
A trailing-grid feature, where available, can move a Long grid upward as the market rises or a Short grid downward as the market falls; Bitget’s current guide says it is available only in Manual mode for Long and Short Futures Grid, not Neutral. It may keep a strategy active during a sustained directional move, but it changes exposure and cannot prevent a reversal, insufficient funds, slippage or missed levels. Review the recalculated range and liquidation risk after any automated movement.
Do not confuse Futures Grid with other Bitget bots
| Product | Core distinction | Why it matters |
|---|---|---|
| Standard Futures Grid | You select or accept suggested range, grid and leveraged futures parameters | This is the product covered here. |
| Standard Spot Grid | Trades spot assets without futures leverage, liquidation or funding | Its risk and cost structure is different; see the Bitget Spot Grid Bot guide. |
| Futures Position Grid | A separate product that uses system-generated or fixed backtested grid parameters | Do not copy its controls or projected metrics into standard Futures Grid instructions. |
| Futures Martingale | Changes position size according to a different averaging strategy | Loss concentration and recovery assumptions differ from a standard grid. |
| Futures Trend-Following or Signal Bot | Uses trend logic or external signals rather than only a fixed grid | Trigger, execution and monitoring risks require separate analysis. |
Account access and partner routes
If you need a new account, open the registration page and verify the displayed referral code, region, product availability and any rebate before completing sign-up. Referral settings can differ by partner link and account eligibility.
Referral-rate notice: Bitget’s May 2026 affiliate-link guide says available rebate options and maximum percentages vary by affiliate account and product. Any BitQED reference to a possible rebate of up to 20% is a non-guaranteed ceiling, not confirmation that BITGETDC gives every user a fixed 20%. The registration screen and subsequent account fee records determine the actual rate; it may be lower, unavailable or restricted by product, region, account status or campaign.
Frequent Futures Grid execution can make account-specific futures fees important. Eligible experienced or high-volume users who want to inspect Bitget’s VIP Trial Pass route can review the separate partner page below before creating or changing an account.
VIP Trial Pass notice: Eligibility, duration, tier, fee treatment, supported products, regional availability and continued benefits are determined by Bitget and can change. Opening the link does not guarantee approval or a permanent VIP rate. Confirm the live landing page and logged-in fee schedule before trading.
When Futures Grid is not a good fit
- You cannot accept liquidation or the possibility of losing the committed margin.
- You do not understand whether a Long, Short or Neutral position is being built.
- You have no price range, invalidation point or maximum-loss rule.
- You are relying on AI APY, past ROI or popularity as a profit promise.
- The estimated profit per grid leaves too little room for trading fees, funding, spread and slippage.
- You cannot monitor margin, funding countdowns, contract status or strategy notifications.
- Automatic margin transfer could draw more account funds than you are prepared to risk.
Pre-launch checklist
- I selected standard Futures Grid, not Position Grid, Martingale or another bot.
- I can explain why Long, Short or Neutral matches my market thesis.
- I defined the range and a separate invalidation point before selecting leverage.
- I compared several grid counts and checked the displayed after-fee profit per grid.
- I verified contract availability, minimum investment, quantity rules and maximum leverage in the live screen.
- I reviewed current and maximum-position liquidation estimates rather than only the present estimate.
- I understand what reserved margin and automatic margin transfer can draw from my account.
- I checked maker/taker rates, funding direction, funding rate and settlement countdown.
- I know that positive grid profit can coexist with negative total profit.
- I configured TP/SL or documented a manual stop process and accept possible slippage.
Termination and reconciliation checklist
- Read total profit and open-position PnL, not grid profit alone.
- Check whether a funding settlement is imminent and whether your side pays or receives.
- Review the current position size, mark price and estimated liquidation price.
- Confirm whether the planned termination closes the position at market and assess available liquidity.
- Record the strategy settings before changing the range, grid count or margin.
- After stopping, verify that all intended positions and orders are closed.
- Confirm the final trading fees, funding entries, realized PnL and returned account balance in history.
- Preserve the order and strategy record for reconciliation rather than relying on a screenshot of headline profit.
Frequently asked questions
Can a Bitget Futures Grid bot be liquidated?
Yes. Futures Grid uses leveraged perpetual-futures positions. A strong move against the bot’s exposure, insufficient margin, funding deductions or additional filled orders can move the position toward liquidation. Reserved margin and automatic margin transfer can add support but do not guarantee prevention.
Should I choose Long, Short or Neutral?
Choose Long for a bullish, oscillating thesis; Short for a bearish, oscillating thesis; and Neutral only for a range-bound thesis where you understand how both directions can create exposure. No direction is automatically safer, and Neutral does not remove breakout or liquidation risk.
Does adding more grids always increase profit?
No. More grids can increase the number of possible fills, but they reduce interval size and profit per grid when capital and range are unchanged. Net results depend on movement, direction, position size, trading fees, funding, spread, slippage and the open position.
Why can total profit be negative when grid profit is positive?
Grid profit reflects completed grid arbitrage after its displayed transaction fees, while floating or accrued PnL reflects the current open futures position. If the floating loss is larger than realized grid profit, total profit is negative. Funding and final exit execution can further change the realized result.
Does Bitget charge an extra Futures Grid subscription fee?
Bitget’s August 2026 Product Fees FAQ says self-configured Futures Grid bots do not have a separate subscription fee. Executed orders still incur the applicable futures trading fee, and an open perpetual position can pay or receive funding. Verify account-specific rates and contract terms.
What happens when price leaves the range or I stop the bot?
Outside the range, new grid orders may pause until price returns, but the open position and liquidation risk can remain. Bitget’s FAQ says canceling the bot closes open positions at the current market price, settles the realized result and returns remaining funds to the futures account; actual execution can include fees and slippage.
Official Bitget sources
- Futures Grid on Bitget — Website Guide — published January 10, 2025
- Futures Grid on Bitget — Mobile App Guide — published February 27, 2025
- What Is Futures Grid Trading? — published June 9, 2025
- Bitget Futures Grid Bot Setup Guide — published June 10, 2025
- Bitget Futures Grid Parameters Explained — published June 14, 2023
- Futures Grid FAQ — published June 14, 2023
- How to Use Trailing Grid with Spot Grid and Futures Grid Bots — published October 30, 2025
- Bitget Product Fees FAQ — published August 20, 2026
- Live Bitget Futures Fee Schedule
- Beginner’s Guide: Calculating Futures Funding Rates — published May 12, 2026
- Bitget Funding Rate Calculation Methodology Update — published July 2, 2026; effective July 10, 2026
- How to Create a Referral Code or Link on the Bitget Affiliate Portal — published May 19, 2026
- Live Bitget Futures Grid creation interface — pair-specific example; values are dynamic
Source verification date: September 5, 2026. The official pages above were reachable when checked. Dynamic product values—including available contracts, minimum investment, maximum leverage, funding rate, funding interval, estimated liquidation price and account fee tier—must still be checked in the live interface.
Editorial, affiliate and risk disclosure
BitQED is an independent Bitget-focused educational site and is not Bitget. This article separates Bitget’s published product definitions from practical interpretation and arithmetic examples. It does not claim that AI or manual settings are optimal and does not guarantee grid profit, total return, fee savings, VIP access, referral benefits or loss prevention.
Some links on this page are sponsored partner links. BitQED may receive compensation if a user registers through them, at no automatic guarantee of a particular benefit to the user. Referral rebates, VIP Trial Pass access, fee schedules, product eligibility and regional availability are controlled by Bitget and can change; verify all terms before registration and trading.
Futures Grid involves leverage, liquidation, trading-fee, funding, spread, slippage, execution, model, operational, counterparty, custody, market and regulatory risks. Losses can be substantial and may occur quickly. Automatic margin transfer can expose additional funds. This page is general educational information, not financial, investment, legal or tax advice; assess whether leveraged derivatives are appropriate for your circumstances.