Bitget Spot Grid is an automated spot-trading tool that places repeated buy and sell orders inside a price range you choose; it is not a guaranteed-yield product. The most important number is total profit, not grid profit alone: a bot can show positive grid profit while its floating PnL is more negative, leaving the overall position at a loss.
This guide explains how to choose a range and grid count, read Bitget’s profit figures, estimate trading fees, understand out-of-range behavior, and decide what happens to the remaining asset when the bot stops. It covers the standard self-configured Spot Grid, not Futures Grid, Spot Position Grid, Smart Grid, Martingale or Bot Copy Trading. Last verified: September 3, 2026. Features, minimum investment, fees and availability can vary by pair, region, account tier and app version; the live creation screen and your logged-in fee schedule are the final checks.
Bitget Spot Grid in one minute
| Decision | What it controls | Main trade-off |
|---|---|---|
| Lower and upper price | The range in which the bot places grid orders | A narrow range may trade more often but can be left quickly; a wide range spreads capital across more prices. |
| Number of grids | How many intervals divide the range | More grids mean tighter spacing and potentially more fills, but smaller order size and profit per completed grid before fees. |
| Arithmetic or geometric | Whether intervals use an equal price difference or equal percentage ratio | Arithmetic is easier to read in price units; geometric keeps percentage spacing consistent across a wider range. |
| Investment | Capital reserved for this bot | The minimum is calculated from the pair and parameters; insufficient order size can make a setup unavailable. |
| Stop conditions | TP/SL, indicator or manual termination behavior where available | A trigger starts the exit process, but market price and slippage can make the actual result differ from the trigger level. |
| Sell at termination | Whether remaining base asset is sold at market when the bot ends | Selling realizes the current result and may incur slippage; not selling leaves you holding the asset and its price risk. |
A practical sequence is: choose a liquid pair you understand, define the price thesis and invalidation level, set a range that matches that thesis, choose a grid count only after checking spacing and estimated per-grid profit, review the live minimum investment and fees, then define how you will stop. Do not start with a desired APR and reverse-engineer a risky range to make the preview look attractive.
How the standard Bitget Spot Grid works
The bot divides your chosen lower-to-upper price range into intervals. It places spot buy orders below the relevant market level and sell orders above it. When a buy and the corresponding higher sell complete, the difference contributes to grid arbitrage profit after transaction fees. As price moves, the bot continues placing eligible orders within the configured range.
On the website, Bitget’s current path is Trade > Bots > Spot > Spot grid. In the app, the current guide uses Trade > Bots > Create bot > Spot grid. Interface labels and regional availability can change, so confirm the product name before funding it.
The bot’s funds are reserved for the strategy rather than freely available for ordinary spot orders. When the strategy ends, the remaining funds return to the account from which the strategy was created. Manual spot activity and account limits can still affect bot operation, so do not treat a bot as isolated from all account-level constraints.
AI settings vs manual settings
Bitget’s AI mode recommends parameters using historical volatility, market data and the risk or market condition selected in the interface. A recommendation is a starting point, not a forecast or a promise that the range will hold. Historical behavior does not prevent a breakout, rapid drawdown, delisting or trading interruption.
Manual mode lets you choose the pair, lower price, upper price, grid count and investment. Depending on the interface, advanced options may include immediate, price, RSI or Bollinger-band start and stop conditions; take-profit and stop-loss; slippage controls; trailing grid; sell at termination; HODL mode; and automatic profit transfer. Treat these as account- and version-dependent features and use only controls actually shown in your live screen.
| Mode | Useful when | What to verify |
|---|---|---|
| AI recommendation | You need a market-data-based starting range and grid count | Why the proposed boundaries make sense, how old the data may be, investment required, and whether you accept a breakout beyond them |
| Manual | You already have a defined range, time horizon and invalidation rule | Grid spacing after fees, order size, pair liquidity, stop behavior and the asset you will hold if price falls |
Choosing the lower and upper price range
The range is the strategy’s core assumption. Spot Grid is designed for repeated movement inside that range, typically a sideways or gradually rising market. The lower boundary is not an automatic guarantee against further losses, and the upper boundary is not a prediction of fair value.
- Use a narrow range only when you accept that a normal move may push price outside it and pause new grid activity.
- Use a wider range only when you understand that the same capital is distributed across more price levels and each order may be smaller.
- Set the lower boundary with a plan for continued price decline. The bot can accumulate or hold the base asset while floating losses grow.
- Set the upper boundary with a plan for a strong rally. The bot may sell incrementally and then stop placing new grid trades above the range, underperforming simple holding.
- Reassess the thesis rather than moving the range merely to avoid admitting that the original setup failed.
Bitget allows range and grid-count adjustments while a bot is running. Its current guide says an adjustment cancels unfilled orders, rebalances the position and initializes the grid again. If remaining strategy funds—including unrealized PnL—are below the new minimum investment, additional funds may be required. A reset can therefore change exposure and should not be treated as a cosmetic edit.
Arithmetic vs geometric grids
Arithmetic grids use the same absolute price difference between adjacent levels. If an educational example divides 90 to 110 into four equal intervals, the levels are 90, 95, 100, 105 and 110. The price difference is 5 at every step, but the percentage move becomes smaller as price rises.
Geometric grids use the same price ratio, so the percentage interval is approximately constant. This can be easier to compare across a wide range, but the absolute price difference grows at higher levels. The live preview should be used for actual rounded prices and order quantities.
Neither method is automatically more profitable. The better choice depends on whether your range thesis is expressed in equal price moves or equal percentage moves, and whether the resulting order sizes and after-fee spacing meet the pair’s live constraints.
How many grids should you choose?
More grids create smaller intervals. That can produce more completed pairs when price oscillates, but with fixed capital it also reduces the amount and gross profit associated with each grid. Every fill still incurs a spot trading fee. More activity is therefore not the same as more net profit.
- Check the preview’s estimated profit per grid after considering both sides of a completed buy-and-sell cycle.
- Leave room for trading fees, spread, quantity rounding and possible market-order slippage.
- Confirm that each order meets the live pair’s minimum order requirements.
- Avoid choosing the maximum grid count simply because the backtest or annualized figure looks larger.
- Compare several nearby grid counts while keeping the same range and investment; observe how interval, order value and projected per-grid return change.
Bitget does not publish one universal minimum investment for every Spot Grid setup. The live amount is calculated from the pair, prices, grid count and current trading constraints. Any article that promises a fixed minimum for all users is likely to become inaccurate.
Grid profit vs floating PnL vs total profit
These three figures answer different questions. Bitget’s current definitions can be summarized as follows:
Total profit = Grid profit + Floating PnL Grid profit = Arbitrage profit − Transaction fees Floating PnL = (Current price − Average buying price) × Current position size
Bitget also describes total profit as the bot’s estimated asset value minus total investment. Estimated asset value changes with the latest market price, so the number can move even when no new grid pair completes.
| Screen figure | What it means | Common mistake |
|---|---|---|
| Grid profit | Completed grid arbitrage profit after transaction fees under Bitget’s displayed definition | Treating it as the bot’s complete account result |
| Floating PnL | Unrealized gain or loss on the base asset currently held by the bot | Ignoring a large loss because grid profit remains green |
| Total profit | The combined strategy result at the current estimated asset value | Assuming it is final before termination and actual execution |
| APR or annualized return | A projection that annualizes current results; very short histories may be especially unstable | Reading an early annualized number as a guaranteed future APY |
A simple profit example
Assume completed grid pairs have produced 18 USDT of arbitrage profit and transaction fees attributable to those displayed grid trades total 3 USDT. Grid profit is then 15 USDT. If the asset still held by the bot has a floating loss of 28 USDT, total profit is approximately 15 − 28 = −13 USDT. Positive grid profit has not prevented an overall loss.
This is an educational simplification. Actual results can include rounded quantities, unmatched positions, changing market prices, spread, strategy adjustments, market-order exits and account-specific fee rates. Use the bot record and the Bitget transaction and order history export guide when reconciling fills rather than relying on one headline metric.
What fees does Bitget Spot Grid charge?
Bitget’s current product FAQ says there is no separate subscription fee for a self-configured Spot Grid bot. Each executed order is charged the applicable spot trading fee. The standard spot schedule published in August 2026 lists 0.1% maker and 0.1% taker, with 0.08% when eligible fees are paid with BGB; VIP levels, pairs, regions, special zones and campaigns can use different rates.
Do not apply 0.1% or 0.08% universally. Check the logged-in Bitget fee guide and live fee schedule before creating the bot, then verify actual deductions in order history. A completed grid normally involves a buy and a sell, so a gross price interval must absorb fees on executed orders before producing net grid profit.
What happens when price leaves the range?
If price moves above the upper boundary or below the lower boundary, the bot may pause or stop placing new grid orders until price returns to the range. This does not freeze the value of assets already held.
- Below the range: the bot can be left holding the base asset after buying during the decline. Floating losses may continue growing.
- Above the range: the bot may have sold portions of the base asset on the way up and then stop trading, so it can capture less upside than simply holding.
- Back inside the range: eligible grid activity may resume, subject to the strategy still running and the pair remaining tradable.
A trailing-grid option, where available, can move the range upward as price rises. It changes the range behavior but does not remove reversal risk. Review the live setting, recalculated boundaries and exit plan before enabling it.
How a Spot Grid bot can stop
Bitget lists several possible termination or interruption reasons: manual cancellation, configured TP/SL or indicator conditions, a pair being delisted, account order limits, insufficient spot balance, trading suspension or abnormal market events. Some conditions depend on account and product status, so the strategy page is the authoritative source for the actual reason.
Sell at termination enabled
The remaining base asset is sold at the current market price. The final execution can differ from a stop trigger because of liquidity, rapid movement and slippage. An unrealized loss may become realized.
Sell at termination disabled
The remaining asset returns to the relevant spot account as the asset itself. This avoids an automatic market sale, but it does not remove price risk; you continue to own the coin. Decide this before starting, not after a sudden move.
Spot Grid risks that the profit preview cannot remove
- Directional market risk: repeated buying in a persistent decline can build a losing asset position.
- Opportunity cost: incremental selling in a strong rally can underperform holding the asset.
- Range risk: a narrow or outdated range can leave the bot inactive while exposure remains.
- Fee and spread risk: tight spacing can leave little net profit after repeated fills.
- Liquidity and slippage risk: stop and termination market orders may execute away from the displayed trigger.
- Operational risk: pair suspension, delisting, service interruption, account limits or incorrect manual changes can affect execution.
- Custody and regulatory risk: assets held on an exchange remain exposed to platform, access and jurisdictional risks.
Standard Spot Grid does not use futures leverage, liquidation or funding fees. That makes its risk structure different from Futures Grid, but it does not make the strategy risk-free. For position sizing and invalidation rules, use the broader Bitget risk-management guide.
Do not confuse these Bitget products
| Product | Core difference | Why the distinction matters |
|---|---|---|
| Standard Spot Grid | You configure or accept AI-recommended range and grid parameters for spot orders | This is the product covered by this guide |
| Futures Grid | Uses derivatives and can involve leverage, liquidation and funding-related risk | Spot Grid risk and fee statements cannot be copied to it |
| Spot Position Grid | A separate product with different system parameters and holding-oriented behavior | Its controls should not be described as standard Spot Grid settings |
| Smart Grid | A newer strategy product with its own automation and interface | Current Smart Grid claims and settings require separate documentation |
| Bot Copy Trading | You follow another creator’s bot rather than independently defining every parameter | Creator selection and copying risks differ; see the Bitget copy-trading guide |
Pre-launch checklist
- I selected standard Spot Grid, not a futures or other grid product.
- I can explain why the lower and upper prices fit my current market thesis.
- I checked the live minimum investment, order value and pair availability.
- I compared grid counts and verified that estimated spacing is not consumed by fees and spread.
- I understand that positive grid profit can coexist with negative total profit.
- I know what the bot does above and below the range.
- I set or documented a manual invalidation rule instead of relying on the preview APR.
- I decided whether remaining assets should be sold or held when the bot terminates.
- I reviewed the live fee schedule and accept the exchange, market and custody risks.
Frequently asked questions
Is Bitget Spot Grid profitable?
It can produce grid profit when price repeatedly moves through the configured levels, but there is no guaranteed profit. Fees, floating losses, a range breakout, a strong trend, slippage and exit execution can make total profit negative.
Why is total profit negative when grid profit is positive?
Grid profit reflects completed grid arbitrage after transaction fees, while floating PnL reflects the unrealized gain or loss on assets still held. If the floating loss is larger than grid profit, total profit is negative.
Does adding more grids increase profit?
Not necessarily. More grids narrow the interval and may increase fill count, but fixed capital is divided into smaller orders and each fill still pays a fee. Net results depend on actual price movement, spacing, order size, fees and the asset position.
What happens if price falls below the lower limit?
New grid activity may pause until price returns, but the bot may continue holding the base asset acquired during the decline. Its floating loss can keep changing below the range.
Does Spot Grid have liquidation or funding fees?
Standard Spot Grid is a spot product and does not use futures leverage, liquidation or funding fees. It still has spot trading fees and market, liquidity, operational and custody risks.
Should I use AI or manual parameters?
AI parameters can be a starting point based on historical data; manual parameters are suitable when you have a defined range thesis. Neither mode predicts the future. Review boundaries, grid spacing, investment, fees and exit behavior yourself.
Official Bitget sources
- How to Create a Spot Grid Bot on the Bitget Website
- How to Create a Spot Grid Bot in the Bitget App
- Spot Grid Terms and Profit Calculations
- Spot Grid FAQ and Termination Conditions
- Spot Grid Market Behavior and Risk Overview
- Bitget Trading Bot Fee FAQ
- Bitget Trading Fee FAQ
- Live Bitget Spot Fee Schedule
Editorial and risk disclosure
BitQED is an independent Bitget-focused educational site and is not Bitget. This guide separates Bitget’s published product definitions from practical interpretation. It does not claim that AI or manual parameters are optimal, and it does not guarantee grid profit, total return or loss prevention.
Cryptocurrency trading can result in substantial loss. Spot Grid involves asset-price, liquidity, fee, slippage, execution, operational, custody and regulatory risks. Product rules and availability may change. This page is general information, not financial, investment, legal or tax advice; assess whether the strategy and asset are appropriate for your circumstances.